DTF Transfers Ready to Press

DTF Transfers Ready to Press

A ready to press DTF transfer arrives at your shop finished. The design is already printed on film, powdered and cured.

Shop Custom DTF Gang Sheets View All DTF Transfers
  • From $0.31 per linear inch
  • 24 inch print width
  • No weeding, no cutting

3 products

Overview

What "ready to press" actually means

A ready to press DTF transfer arrives at your shop finished. The design is already printed on film, powdered and cured. You place it on the garment, press it, and peel. There is no weeding, no cutting, no vinyl to layer and no printer to own. The only equipment you need is a heat press.

That is the difference between DTF and heat transfer vinyl. With vinyl you cut the design and pick out every piece of material that is not part of it, which on detailed artwork can take longer than pressing the shirt. With DTF the sheet comes out of our printer the way it goes onto the garment.

Included

What we print ready to press

Application

How to press them

Most suppliers, and Google's own AI answer, give a range of 300°F to 320°F for 10 to 15 seconds. Here is the sequence we run on every order we press in our own shop, and the numbers we stand behind:

1

Pre-press the garment

Pre-press the garment for 5 seconds. This pulls the moisture out and flattens the surface. Skipping it is the most common reason a transfer lifts at the edges.

2

Press the transfer

Press the transfer at 300°F for 10 seconds with medium firm pressure, 60 to 80 PSI.

3

Peel

Peel. Our custom gang sheets are hot peel: wait 5 to 10 seconds, until the film is warm rather than hot, then pull in one steady motion. Glitter is cold peel: wait until the film is completely cold, not warm.

4

Seal it, never skip this step

Seal it at 310°F for 10 seconds. Never skip this step. The second press is what bonds the ink into the fibers. Use a teflon sheet for a glossy finish, or lay a cotton tee or linen cloth on top for a matte finish.

Heat presses are not calibrated the same way, so treat these as a starting point and test one shirt before running a batch. Always press on a flat area with no seams or zippers underneath.

Compatibility

Fabrics that fight back

DTF holds on cotton, polyester blends, canvas and most standard apparel. Three cases give us trouble in the shop and are worth knowing before you order:

Moisture wicking and UV treated garments

The chemical finish sits between the ink and the fiber and weakens adhesion. Some cotton piqué polos carry the same treatment without saying so on the label.

Certain polyesters

Under heat the dye migrates and stains the transfer. It is the same problem you get pressing over a sublimated garment.

Anything with a texture

The film needs a flat surface to bond into the fabric.

Compare

Pricing and turnaround

Gang sheets are priced per linear inch of 24 inch wide film. Most suppliers print on 22 inch film, so each linear inch you buy from us carries about 9 percent more usable area.

24–96 in
$0.35per linear inch

$0.014583 per square inch

108–192 in
$0.33per linear inch

$0.013750 per square inch

250–360 in
$0.32per linear inch

$0.013333 per square inch

500 in & up
$0.31per linear inch

$0.012917 per square inch

A 24 inch sheet costs $8.40. A 600 inch roll costs $186.00. There is no order minimum, no membership and no setup fee.

Orders placed before 1:00 PM ET Monday through Friday go into production the same business day. We print and ship from our Florida facility to anywhere in the United States. Ground shipping is free on orders over $99. We ship only and do not offer pickup.

Answers

Questions we get

Do you press DTF transfers twice?

Yes. The first press bonds the design, the second press after peeling seals it. Both are 10 seconds. The second one is the step people skip and then wonder why the print cracks.

How long do ready to press transfers last before you press them?

Kept flat, out of sunlight and away from humidity, a year or more. We ship them flat for that reason.

How soon after pressing can the shirt be washed?

Wait 24 hours, then wash inside out in cold water and hang dry or tumble low.

Can you over press a DTF transfer?

Yes. Too much heat or time scorches the garment and can dull the colors. If the print looks glossy in a way you did not want, that is usually heat, not the film.

Do I need parchment paper?

A teflon sheet is better. Parchment works, with one warning from our shop: if the paper wrinkles, the wrinkle presses into the transfer.

Are your inks certified?

Our inks, film and powder are all OEKO-TEX certified.

Ready to Order?

There is no order minimum, no membership and no setup fee.

Shop Custom DTF Gang Sheets View All DTF Transfers