DTF Transfers by Size

$0.95

We ship from Miami to all 50 states: UPS Ground $11.99, free from $99.

DTF Transfers by Size are individually cut, ready to press pieces priced by size, from 2" x 2" at $0.95 up to 12" x 17" at $9.10, with no order minimum. Pick the size you need and upload your print-ready file, then we print, cut and ship from Miami to all 50 states.

Flat price per size No minimums Hot peel 24-hour production

Size	Price
2" x 2"	$0.95
4" x 4"	$1.90
8" x 8"	$4.40
12" x 17"	$9.10

View full details

Six DTF transfers by size of the same floral design, cut individually from small to large, laid flat on a pink background

What DTF Transfers by Size are

A DTF transfer by size is one design, cut to the exact dimensions you ask for. Sizes start at 2x2 inches and go up to 12x17 inches. We print, powder, and cure it the same way we do our gang sheets, then cut it into individual pieces before shipping. So you get the finished transfer, not a full sheet you have to fill.

Ordering custom DTF transfer sheets one size at a time is the right move when you only need a few pieces. Maybe it’s a sample, a one-off order, or a small batch of shirts that won’t fill a full gang sheet. But once you hit ten or more pieces of the same size, the numbers below show that a gang sheet costs less per piece.

18 sizes, from 2″ x 2″ to 12″ x 17″
Flat price per size, no linear inch math
Same hot peel, press and seal process as our gang sheets
No order minimum, no setup fee

Ships from Florida

Produced in Miami, shipped nationwide. Free ground shipping on orders of $99 or more.

One floral DTF transfer cut to size next to a tape measure, showing the dimensions of a single piece

DTF transfer sizes and pricing

We sell DTF transfers by size. Each piece is cut individually and ready to press. Each size has one flat price. A 2x2 costs $0.95, and a 12x17 costs $9.10. There is no minimum order. Larger sizes cost less per square inch, just like our gang sheets. We print, cut, and ship from Miami to anywhere in the US.

Need more than a few pieces? Twenty 4" x 4" transfers bought separately run you $38.00. Put those same twenty designs on a 24 inch Custom DTF Gang Sheet, and it costs $8.40. Once you're past about ten pieces, a gang sheet is the cheaper route for the same artwork.

How to Order DTF Transfers by Size

Standard 24-hour production turnaround Monday through Friday from order confirmation. Delivery time is separate.

Choose Size & Upload Artwork

Pick a size from the 18 options, starting at 2″ x 2″ and going up to 12″ x 17″. Then upload your file. PNG is our preferred file format, and we also accept PDF, AI, and PSD files, all at 300 DPI. A transparent background is required.

We Review Your File

We check every file before production. If something needs fixing, like low resolution, missing transparency or tiny fonts, we reach out.

Production and Shipping

Orders confirmed Monday through Friday go into production within 24 hours. Free shipping on orders of $99 or more.

Floral DTF transfer by size placed on a white t-shirt in a heat press, ready to press

How to press these transfers

Follow the Custom DTF sequence below: prepare the garment, apply the transfer, hot peel, then seal the design.

1. Press the empty garment for 10 seconds at 300°F on cotton and blends, or 280°F on polyester and synthetics. This gets the moisture out of the fabric and flattens the surface.

2. Press the transfer for 10 seconds at the same temperature. Pressure: 60 to 80 PSI on an auto or pneumatic press, medium to firm on a manual press. No gauge on your press? Here is how to set medium to firm pressure by hand.

3. Hot peel: lift the press, wait 5 to 10 seconds, then pull the film off in one motion. If you cannot peel right away, the film still comes off clean once the transfer has fully cooled.

4. After removing the film, cover the design (Teflon sheet for a glossy finish, cotton or linen for a matte finish) and press for 10 seconds at the same temperature to seal. This last press is what makes the print stick and stay.

Heat presses don't all come calibrated the same, so run a test piece before you press a whole batch. Our pressing instructions page has the full pressing sequence and the wash test behind it.

Close-up of a floral DTF transfer on white fabric, showing the print detail on the film

Where these transfers work

DTF holds on cotton, poly blends, fleece and canvas.

Three situations to check before you press:

Chemically treated garments:Moisture wicking and UV protection finishes sit between the ink and the fiber. They weaken adhesion. Some cotton piqué polos have the same treatment but don't list it on the label. That's why a polo order can fail when a tee order of the same cotton did not.
Dye migration on polyester: Heat makes the dye leave the fabric and stain the transfer. You usually see a pink or grey cast a day later. This is the same problem as pressing over a sublimated garment. Lower temperature helps, but it does not always fix it.
Textured or uneven surfaces: Ribbed knits, heavy seams and anything that keeps the platen off the design.

Works well on

Cotton, polyester blends, fleece and canvas.

⚠Before you order

Orders confirmed Monday through Friday go into production within 24 hours.
You have to use the seal press. Skip it and the transfer can crack early.
Test one piece before you press a full batch. Heat presses are not calibrated the same way.

Need More Than a Few Pieces?

Twenty 4" x 4" transfers cost $38.00 for that size. The same designs on a 24 inch Custom DTF Gang Sheet cost $8.40.

Shop Custom DTF Gang Sheets View All Ready to Press DTF

Questions we get

Is there a minimum order?

No. Order a single piece or any mix of sizes.

How is the price calculated?

Each size has a flat price based on its total square inches, not a per linear inch rate. Larger sizes cost less per square inch, just like our gang sheets. Compare it with the price per inch for gang sheets before you order ten or more pieces.

Can I mix different sizes in one order?

Yes. Order any combination of the 18 sizes in a single order.

When should I order a gang sheet instead?

When you need about ten or more pieces in similar sizes, a gang sheet saves you money. Check the numbers above to see the difference.

Do you press these twice?

Use 300°F on cotton and blends, or 280°F on polyester and synthetics. Use 60 to 80 PSI on an auto or pneumatic press, or medium to firm pressure on a manual press. Pre-press the empty garment for 10 seconds to remove moisture. Position the transfer and press for 10 seconds. Open the press, wait 5 to 10 seconds, then peel the film off in one smooth motion. Cover the design (Teflon sheet for a glossy finish, cotton or linen for a matte finish) and press for 10 seconds to seal. Use the selected temperature throughout. Test one garment before running a batch.

How soon can the garment be washed?

Wait 24 hours. Then inside out, cold water, hang dry or tumble low.

Are your inks certified?

Our DTF inks, film and powder are all OEKO-TEX certified.

Discover more products you'll love

UV DTF gang sheets wholesale — hard surface transfers for cups, glass, and metal applications

DTF Transfers by Size